honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Ring Gear, A/T > < Data Link Connector, A/T|Locations
Page 1
background image

Carrier Bearings: Service and Repair

REPLACEMENT

TOOL REQUIRED 

-

07746-0030100 Driver 40 mm I.D.

-

Or Equivalent

NOTE:  Check bearings for wear and rough rotation. If bearings are OK, removal is not necessary.

1. Remove bearings using a bearing puller.

2. Install new bearings using the special tool as shown.

Ring Gear, A/T > < Data Link Connector, A/T|Locations