honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Indicator Input Test|Page 5071 > < Indicator Input Test|Page 5069
Page 1
background image

Shift Indicator: Testing and Inspection
Switch Test

1. Remove the front console.
2. Disconnect the 14P connector from the A/T gear position switch.

3. Check for continuity between the terminals in each switch position according to the table.

-

Move the shift lever back and forth without pushing the shift lever at each switch position, and check for continuity within the range of free
play of the shift lever.

-

If there is no continuity within the range of free play, adjust the position of the switch.

Indicator Input Test|Page 5071 > < Indicator Input Test|Page 5069