honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Ignition Switch - Key Cannot Be Removed|Page 5210 > < Ignition Switch - Key Cannot Be Removed|Page 5208
Page 1
background image

Shift Cable: Service and Repair

REMOVAL / INSTALLATION 

WARNING:  Make sure lifts are placed properly. 

1. Remove the front console.

2. Shift to [N] position, then remove the lock pin from the adjuster.

3. Remove the shift cable bracket.
4. Remove the shift cable holder.
5. Remove the shift cable cover.

Ignition Switch - Key Cannot Be Removed|Page 5210 > < Ignition Switch - Key Cannot Be Removed|Page 5208