Civic DX Coupe L4-1590cc 1.6L SOHC MFI (1999)
Pressure Plate: Testing and Inspection
REMOVAL / INSPECTION
1. Inspect the fingers of the diaphragm spring for wear at the release bearing contact area.
2. Check the diaphragm spring fingers for height using the special tools and a feeler gauge.
If the height exceeds the service limit, replace the pressure plate.
3. Install the special tools.
4. To prevent warping, unscrew the pressure plate mounting bolts in a crisscross pattern in several steps, then remove the pressure plate.
5. Inspect the pressure plate surface for wear, cracks, and burning.
6. Inspect for warpage using a straight edge and feeler gauge.
