honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Front Axle|Page 5420 > < Fluid - Differential|Service Precautions
Page 1
background image

Axle Shaft: Service and Repair
Front Axle

INSPECTION 

Driveshaft Boot 
Check the boots on the driveshaft for cracks, damage, leaking grease and loose boot bands. If any damage is found, replace the boot and boot bands.

Loose Splines 
Turn the driveshaft by hand and make sure the splines and joint are not excessively loose. If any damage is found, replace the inboard joint.

Twisted or Cracked 

Make sure the driveshaft is not twisted or cracked. Replace it if necessary.

REMOVAL 

1. Loosen the wheel nuts slightly.
2. Raise the front of the vehicle, and support it with safety stands in the proper locations.

3. Remove the wheel nuts and front wheels.
4. Drain the transmission fluid.
5. Raise the locking tab on the spindle nut, then remove the nut.

Front Axle|Page 5420 > < Fluid - Differential|Service Precautions