Civic DX Coupe L4-1590cc 1.6L SOHC MFI (1999)
4. Install the molding around the edge of the quarter glass as shown.
NOTE:
-
If the old molding is to be reinstalled, scrape off the old adhesive tape from the molding, and clean the molding surface with alcohol where
new adhesive tape is to be applied. Apply the double-faced adhesive tape to the molding and quarter glass as shown.
-
Be careful not to touch the quarter glass where adhesive will be applied.
Adhesive tape A (3M 4215, or equivalent)
Thickness: 0.4 mm (0.02 in.)
Width: 5 mm (0.2 in.)
Length: 440 mm (17.3 in.)
Adhesive tape B (NITTO 501, or equivalent)
Thickness: 0.16 mm (0.006 in.)
Width: 8 mm (0.3 in.)
Length: 440 mm (17.3 in.)
Adhesive tape C (3M 4213, or equivalent)
Thickness: 0.8 mm (0.03 in.)
Width: 5 mm (0.2 in.)
Length: 30 mm (1.2 in.)
