honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Front Wiper Motor|Page 9530 > < Front Windshield Wiper Motor|Page 9527
Page 1
background image

Wiper Motor: Testing and Inspection
Front Wiper Motor

1. Open the hood, and remove the cap nuts. Carefully remove the wiper arms so that they do not touch the hood.
2. Remove the cowl cover by prying out the trim clips.

3. Disconnect the 5P connector from the windshield wiper motor.

4. Test the motor by connecting battery power and ground according to the table.

If the motor does not run or fails to run smoothly, replace it.

5. Connect an analog voltmeter between the No.5 (+) and No.3 (-) terminals, and run the motor at low or high speed.

The voltmeter should indicate 0 V and 4 V or less alternately.

Front Wiper Motor|Page 9530 > < Front Windshield Wiper Motor|Page 9527