Civic DX Sedan L4-1668cc 1.7L SOHC MFI (2001)
Shifter M/T: Testing and Inspection
Shift Lever Clearance Inspection
1. Measure the clearance between shift lever (A) and the select lever (B) with a feeler gauge (C). If the clearance is more than the service limit, go to
step 2.
Standard:
'01 model: 0.05-0.40 mm (0.002-0.016 in.)
'02 model: 0.05-0.35 mm (0.002-0.014 in.)
Service Limit:
'01 model: 0.6 mm (0.024 in.)
'02 model: 0.6 mm (0.024 in.)
2. Measure the groove of the shift lever.
-
If distance is not within the standard, replace the shift lever with a new one.
-
If distance is within the standard, replace the select lever with a new one.
Standard:
'01 model: 15.00-15.15 mm (0.591-0.596 in.)
'02 model: 13.00-13.15 mm (0.512-0.518 in.)
