honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Keyless Entry Programming Connector > < Keyless Entry Module|Locations|Page 8911
Page 3
background image

6. Disconnect the M, P, K, and J connectors from the under-dash fuse/relay box, and make these input tests at the connectors.

-

If any test indicates a problem, find and correct the cause, then recheck the system.

-

If all the input tests prove OK, the multiplex control unit must be faulty. Replace the under-dash fuse/relay box assembly.

Keyless Entry Programming Connector > < Keyless Entry Module|Locations|Page 8911