Civic EX Sedan L4-1668cc 1.7L SOHC (VTEC) MFI (2001)
_mfi/Page-2780003.png)
6. If necessary, remove the bolts, then remove the grab handle bracket (A). Remove the remaining grab handle brackets, if necessary.
7. Install the headliner in the reverse order of removal, and note these items:
-
When reinstalling the headliner through the door opening, be careful not to fold or bend it. Also, be careful not to scratch the body.
-
If the threads on a visor and grab handle screws are worn out, use an oversized self-tapping ET screw (P/N 901 37-S0A-00301) made
specifically for this application.
-
Check that both sides of the headliner are securely attached to the trim.
-
Replace any clips that remain in the roof during renoral. Reinstall the clips back in the headliner before installation.
