Civic EX Sedan L4-1668cc 1.7L SOHC (VTEC) MFI (2001)
_mfi/Page-2789001.png)
Trim Panel: Service and Repair
Trim Removal/Installation - Door Area
Trim Removal/Installation - Door Area
Special Tools Required
KTC trim tool set SOJATP2014
2-door
NOTE:
-
Put on gloves to protect your hands.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
-
Take care not to bend or scratch the trim and panels.
1. Remove the trim as shown:
-
To remove the door sill trim and B-pillar upper trim, remove the side trim panel as necessary.
-
To remove the front side cap and opener lock cylinder, refer to trunk lid opener/fuel fill door opener replacement.
2. Install the pants in the reverse order of removal, and note these items:
-
Replace any damaged clips.
-
Apply liquid thread lock to the anchor bolts before installation.
-
Before installing the anchor bolts, make sure there are no twists or kinks in the seat belts.
Special Tools Required
KTC trim tool set SOJATP2014
4-door
NOTE:
-
Put on gloves to protect your hands.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
-
Take care not to bend or scratch the trim and panels.
1. Remove the trim as shown:
