honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Component Locations|Page 10291 > < Component Locations|Page 10289
Page 1
background image

Sunroof/Moonroof Limit Switch: Testing and Inspection

Limit Switch Test

1. Remove the headliner.

2. Disconnect the 4P connector from the moonroof limit switch.

3. Check for continuity between the terminals in each switch position according to the table.

NOTE:  Turn the motor by hand with the wrench.

4. If the continuity is not as specified, replace the moonroof limit switch.

Component Locations|Page 10291 > < Component Locations|Page 10289