Civic EX Sedan L4-1668cc 1.7L SOHC (VTEC) MFI (2001)
_mfi/Page-720008.png)
15. Check the camshaft pulley marks (A)
^
If the camshaft pulley marks are also at TDC, go to step 15.
^
If the camshaft pulley marks are not at TDC, remove the timing belt and repeat steps 2 through 11.
16. Install the upper cover (A), then connect the camshaft position (CMP) (top dead center (TDC)) sensor connector (B), and install the grommet (C).
17. Install the upper bracket (A), then tighten the nuts in the numbered sequence shown.
18. Install the cylinder head cover.