honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Lighting and Horns|Horn > < Low Beam Relay|Locations|Page 11322
Page 3
background image

Blower Motor Relay Type 1, Type 2

Check for continuity between the terminals.

-

There should be continuity between the No.1 and No.3 terminals when power and ground are connected to the No.2 and No.4 terminals.

-

There should be no continuity between the No.1 and No.3 terminals when power is disconnected.

Five-terminal type

Check for continuity between the terminals.

-

There should be continuity between the No.1 and No.2 terminals when power and ground are connected to the No.3 and No.5 terminals.

-

There should be continuity between the No.1 and No.4 terminals when power is disconnected.

Lighting and Horns|Horn > < Low Beam Relay|Locations|Page 11322