Civic EX Sedan L4-1668cc 1.7L SOHC (VTEC) MFI (2001)
12.
Using the Secondary Lock Opener from the Terminal Maintenance Set (T/N 070AZ-S5A0100), carefully pry open the secondary lock on the
RED/WHT wire side of the 16P connector.
13.
Twist off a terminal remover from the Terminal Remover Set (T/N 070AZ-S5A-011). Insert the terminal remover into the center row cavity of the
16P connector, above the RED/WHT wire cavity, then remove and discard the RED/WHT wire.
14.
Strip off 7 mm of insulation from the vehicle wire harness side of the RED/WHI wire. Insert the stripped end into one side of the splice connector,
and crimp the connector.
15.
Cut the new RED/WHI wire 170 mm from the end of its terminal. Then strip off 7 mm of insulation from the cut end.
16.
Insert the stripped end of the new RED/WHI wire into the other side of the splice connector, then crimp the connector.