honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Engine Controls - Occasional Stalling When Stopping|Page 4824 > < A/T - Vehicle Won't Move/MIL ON/DTC P0730|Page 4819
Page 1
background image

PROM - Programmable Read Only Memory: Customer Interest
Engine Controls - Occasional Stalling When Stopping

02-083

February 20, 2004

*Applies To:
*2001-02 Civic DX, LX, HX, EX - ALL*

2001-02 Civic: Stalls Intermittently After a Stop 
(Supersedes 02-083, dated December 23, 2002)

Updated information is shown with asterisks.

SYMPTOM

The engine occasionally stalls after the vehicle comes to a stop.

PROBABLE CAUSE

Ignition timing and the idle air control (IAC) valve response time may be insufficient when the engine idle speed falls below the PCM's learned idle
speed value.

CORRECTIVE ACTION

Use the Honda Interface Module (HIM) to update the software in the ECM/PCM.

TOOL INFORMATION

You will need these tools and equipment items:

^

iN Workstation

^

Honda Interface Module (HIM): T/N EQS05A35570

^

PC Interface Cable (RS232): T/N VET-02002832

* This is the same cable you use to connect the HIM to the iN workstation. The cable is blue with an attached adapter.*

^

AC Adapter (110 VAC/12 VDC Power Supply): T/N: VET-02002426

This is the adapter needed for the HIM.

These tools are already at your dealership. To order additional HIMs, interface cables, or AC adapters, call the Honda Tool and Equipment Program at
1-888-424-6857. Phone lines are open Monday through Friday from 7:30 a.m. to 7:00 p.m. CT.

WARRANTY CLAIM INFORMATION

In warranty: The normal warranty applies.

Operation Number:

123503

Flat Rate Time:

0.3 hour

Failed Part:

P/N 37820-PLR-L55 
H/C 7064371

*Defect Code:

03214

Symptom Code:

09302*

Template ID:

02-083B

Skill Level:

Repair Technician

Engine Controls - Occasional Stalling When Stopping|Page 4824 > < A/T - Vehicle Won't Move/MIL ON/DTC P0730|Page 4819