Civic EX Sedan L4-1668cc 1.7L SOHC (VTEC) MFI (2001)
_mfi/Page-2217004.png)
21. Position the pump drive shaft (A) in the pump housing, then drive it in with the appropriate size socket wrench (B) as shown.
22. Install the 40 mm snap ring (C) with its radiused side facing out.
23. Coat the new 23.8 mm O-ring (A) with power steering fluid, then position it into the groove on the bottom of the pump housing.
24. Coat the new cover seal (A) and 13 mm O-ring (B) with the power steering fluid, then position them into the grooves on the cover (C).
