Civic EX Sedan L4-1668cc 1.7L SOHC (VTEC) MFI (2001)
74. Attach the yoke (A) of a universal puller to the gearbox housing (B) with bolts, then securely clamp the yoke in a vise with jaws. Do not clamp the
gearbox housing in a vise.
75. Push the cylinder (A) into the gearbox housing (B) so the notch (C) is aligned with the pin (D) inside of the gearbox housing.
76. Tighten the lock screw (A) by hand first, then install the special tool (B) on the lock screw. Lightly tighten the lock screw. Do not tighten the lock
screw to specified torque yet.
77. Remove the special tool and yoke from the steering gearbox.