honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Continuously Variable Transmission|Page 5468 > < Continuously Variable Transmission|Page 5466
Page 1
background image

Transmission Position Switch/Sensor: Service and Repair

Transmission Range Switch Replacement

1. Remove the intake air duct and resonator.
2. Shift to the N position.

3. Remove the transmission range switch shaft cap (A).

4. Disconnect the transmission range switch connector (A).
5. Remove the transmission range switch (B).

6. Make sure that the control lever is in the N position.

Continuously Variable Transmission|Page 5468 > < Continuously Variable Transmission|Page 5466