honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

M/T - Clicking Noise Driving in 2nd Gear|Page 5742 > < M/T - Clicking Noise Driving in 2nd Gear|Page 5740
Page 3
background image

3.

Remove and discard the shift fork.

4.

Apply vinyl tape to the mainshaft splines to protect the seal, then remove the mainshaft and shift forks as an assembly from the clutch housing.

5.

Disassemble the countershaft assembly; see page 13-32 (13-45 for Hybrid) of the service manual.

M/T - Clicking Noise Driving in 2nd Gear|Page 5742 > < M/T - Clicking Noise Driving in 2nd Gear|Page 5740