honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Shift Forks Clearance Inspection|Page 5850 > < Shift Forks Clearance Inspection
Page 2
background image

4. Measure the width of the shift arm.

-

If the width of the shift arm is not within the standard, replace the shift arm with a new one.

-

If the width of the shift arm is within the standard, replace the shift fork or shift piece with a new one.

Standard: 12.9-13.0 mm (0.508-0.512 in.) 

Shift Forks Clearance Inspection|Page 5850 > < Shift Forks Clearance Inspection