Civic EX Sedan L4-1668cc 1.7L SOHC (VTEC) MFI (2001)
_mfi/Page-3304004.png)
16. With a sponge, carefully apply a light coat of body primer to any exposed paint or metal around the flange where new adhesive will be applied. Let
the primer dry for at least 10 minutes:
-
Do NOT apply body primer to any remaining original adhesive on the flange.
-
Be careful not to mix up the body and glass primer sponges.
-
Never touch the primed surfaces with your hands.
17. Cut a "V" in the end of the nozzle (A) on the adhesive cartridge as shown.
18. Put the cartridge in a caulking gun, and run a bead of adhesive (A) around the edge of the rear window (B) and moldings (C) as shown. Apply the
