honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Door - Weatherstrip Detached or Deformed|Page 8594 > < Body - Unibody Repair Guidelines|Page 8585
Page 1
background image

Weatherstrip: Customer Interest
Door - Weatherstrip Detached or Deformed

Bulletin No.
92-021

Issue Date
April 17, 1995

Model [NEW]
1992-95 
Civic 
4-door

Applicable to [NEW]
All

File Under
Body

Rear Door Weatherstrip Detached or Deformed 
(Supersede 92-021, Wind Noise From Rear Door, dated June 19, 1992)

PROBLEM [NEW]

A section of the weatherstrip on the rear door(s) has come loose, possibly causing it to get deformed or torn by the door.

CORRECTIVE ACTION

Reattach or replace the weatherstrip.

1.

Remove the retaining clip that holds the weatherstrip to the door.

2.

Examine the weatherstrip. If it is torn, remove and discard it. If it is OK, lift about 4 mm on each side of the affected area.

3.

Clean the door sash and the weatherstrip in the affected area with isopropyl alcohol, and allow it to dry.

4.

Apply a 4 mm x 150 mm bead of 3M Weatherstrip Adhesive (P/N 051135-08011) to the door sash and the weatherstrip.

NOTE:

Careful application of the weatherstrip adhesive will minimize cleanup. Remove traces of weatherstrip adhesive with 3M Adhesive Cleaner, 3M P/N
051135-08904.

5.

Wait until the adhesive is tacky, then reinstall the weatherstrip.

6.

Leave the door open for 5 to 10 minutes to allow for complete drying.

PARTS INFORMATION

Weatherstrip, right door:
P/N 72810-SR4-003, H/C 3889235

Door - Weatherstrip Detached or Deformed|Page 8594 > < Body - Unibody Repair Guidelines|Page 8585