honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Fail Safe Relay, ABS / Traction Control > < Electronic Brake Control Module|Locations|Page 6456
Page 1
background image

Electronic Brake Control Module: Service and Repair

Fig. 90 Control Unit Replacement

Refer to Fig. 90 when replacing the control unit.

1. Remove right side trunk trim panel.
2. Disconnect control unit connectors.
3. Remove control unit mounting bolts, then the control unit. When control unit mounting bolts are removed, the control unit's memory is

cleared.

4. Reverse procedure to install.

Fail Safe Relay, ABS / Traction Control > < Electronic Brake Control Module|Locations|Page 6456