Civic Hatchback L4-1.5L SOHC (VTEC) (1995)
13. Coat a new piston seal with silicone grease and in stall it in the caliper.
14. Apply brake cylinder grease (P/N: 08733-BO2OE) or equivalent rubber grease to the sealing lips and inside of a new piston boot, and install it in
the caliper.
15. Coat the outside of the piston with brake fluid and install it on the adjusting bolt while rotating it clockwise with the special tool.
16. Install the pad spring on the caliper.
17. Install the brake pad retainers and brake pads.
CAUTION: Avoid damaging the piston and piston boot.
18. Align the cutout in the piston with the tab on the inner pad.