honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Tail Lamp > < Turn Signal Switch|Testing and Inspection
Page 1
background image

Turn Signal Switch: Service and Repair

1.

On models equipped with drivers' airbag, disarm airbag as described under Air Bags and Seat Belts / Air Bags (Supplemental Restraint
Systems / Airbag System Disarming)
.

2.

On all models, disconnect battery ground cable.

3.

Remove steering column upper and lower covers.

4.

Disconnect switch electrical connectors.

5.

Remove two switch attaching screws, then slide switch assembly out of housing.

6.

Reverse procedure to install.

7.

Rearm airbag, if equipped.

Tail Lamp > < Turn Signal Switch|Testing and Inspection