honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Separating the Tire From the Wheel|Page 854 > < Separating the Tire From the Wheel|Page 852
Page 3
background image

Tire rotation is recommended to equalize wear for longer life. If the following conditions are noted, rotate the tires:

-

Front tire wear is different from rear.

-

Uneven wear exists across the tread of any tire.

-

Left and right front tire wear is unequal.

-

Left and right rear tire wear is unequal. Check wheel alignment if the following conditions are noted:

-

Left and right front tire wear is unequal.

-

Wear is uneven across the tread of any front tire.

-

Front tire treads have a scuffed appearance with "feather" edges on one side of the tread ribs or blocks.

Inflation of Tires

Tire pressure, in cold condition (after vehicle has set for three hours or more, and driven less than one mile) should be checked monthly or before any
extended trip. Tire pressure increases approximately 15% when the tires become hot during driving. Tire pressure specification is shown on the label
located on the left door lock pillar.

NOTE:  Check the tire pressure whenever irregular wear is found. Tire inflation greatly affects tire wear. If the alignment check does not reveal any
alignment problems, check the condition of the shock absorbers and wheel/tire balance.

Tire Replacement

TIRE REPLACEMENT 

When replacement is necessary, the original metric the size should be used. Most metric tire sizes do not have exact corresponding alphanumeric tire
sizes. It is recommended that new tires be installed in pairs on the same axle. If necessary to replace only one tire, it should be paired with tire having
the most tread, to equalize braking traction.

CAUTION:  Do not mix different types of tires such as radial, bias and bias-belted tires except in emergencies, because vehicle handling may be
seriously affected and may result in loss of control.

Tire Dismounting 

Remove valve cap on valve step and deflate the tire. Then use a tire changing machine to mount or dismount tires. Follow the equipment
manufacturer's instruction. Do not use hand tools or tire lever alone to change tires as they may damage the tire beads or wheel rim.

Separating the Tire From the Wheel|Page 854 > < Separating the Tire From the Wheel|Page 852