honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Idle Speed/Throttle Actuator - Electronic > < General System Description|Page 1735
Page 1
background image

Engine Control Module: Service and Repair

ECU Replacement

1. Disconnect the negative battery cable.
2. Remove the right door sill molding.
3. Remove the small cover on the right kick panel.
4. Pull the passenger's side carpet back to expose the ECU.
5. Unbolt the ECU bracket and remove the ECU wire harness.
6. Remove ECU.
7. Reverse procedure to install replacement unit.

Idle Speed/Throttle Actuator - Electronic > < General System Description|Page 1735