honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Seat Belts - Torn Seal On Track|Page 3839 > < Seat Belts - Torn Seal On Track|Page 3837
Page 3
background image

10.

Reinstall the clips. Press each one onto the track as you pry up its inside edge with a screwdriver.

11.

Tape both ends of the seal to the track with two turns of vinyl electrical tape. Don't let inner and outer seals overlap.

12.

Reinstall the track and reconnect the connectors, then check seat belt operation.

13.

If a seal on the other track is torn, repeat steps 1 through 12 on that side.

PARTS INFORMATION

WARRANTY CLAIM INFORMATION

In warranty:
The normal warranty applies.

Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager. You must request
consideration, and get the DSM's decision, before starting work.

Seat Belts - Torn Seal On Track|Page 3839 > < Seat Belts - Torn Seal On Track|Page 3837