honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Power Steering|Page 3422 > < Power Steering|Page 3420
Page 3
background image

CAUTION:Replace the exhaust gasket and self-locking nuts when you reinstall the pipe.

10. Remove the header pipe.

11. Remove the gearbox shield
12. Using solvent and a brush, wash any oil and dirt off the control unit, its lines, and that end of the gearbox. Blow dry with compressed air.

13. Disconnect the three lines from the control unit.

Power Steering|Page 3422 > < Power Steering|Page 3420