Civic HX Coupe L4-1668cc 1.7L SOHC (VTEC-E) MFI (2001)
_mfi/Page-2637001.png)
Trunk / Liftgate Weatherstrip: Procedures
Trunk Lid Weather-strip Replacement
1. Remove the trunk lid weather-strip (A) by pulling it off.
2. Locate the painted alignment mark (B or C) on the trunk lid weather-strip. Align the painted mark with the alignment tab in the center of the trunk,
and install the weather-strip. Make sure it's seated completely and facing in the direction shown. Make sure there are no wrinkles in the
weather-strip.
3. Check for water leaks.
