Civic HX Coupe L4-1668cc 1.7L SOHC (VTEC-E) MFI (2001)
_mfi/Page-1187004.png)
6.
Connect the original hoses and the new tubes as shown.
7.
Reinstall the fuel tank.
8.
Reinstall the fuel tank unit with a new base gasket and a new locknut.
9.
Reinstall the fuel line to the tank with a new fuel feed retainer.
10.
Refill the tank with the fuel you removed in step 2.
REPAIR PROCEDURE B
1.
Relieve the fuel pressure:
^
Refer to page 11-161 of the 2002-2004 CR-V Service Manual, or
^
Online, enter keywords FUEL PRESSURE, and select Fuel Pressure Relieving from the list.
2.
Drain the fuel, then remove the fuel tank:
^
Refer to page 11-171 of the service manual, or
^
Online, enter keyword TANK, and select Fuel Tank Replacement from the list.
3.
Remove the EVAP canister:
^
Refer to page 11-217 of the service manual, or
^
Online, enter keyword CANISTER, and select EVAP Canister Replacement from the list.
4.
Remove the EVAP solenoid valve from the EVAP canister:
^
Remove pressure sensor tube B; it will not be reused.
^
Remove fuel vent tube C; it will not be reused.
^
Remove fuel vent tube D; it will not be reused.
^
Disconnect the 2P connector.
^
Remove the EVAP solenoid valve bolts. The bolts will be reused.
