Civic HX Coupe L4-1668cc 1.7L SOHC (VTEC-E) MFI (2001)
5.
Apply grease on the ball joint remover at the areas shown to ease installation of the tool and to prevent damage to the pressure bolt threads.
6.
Use the ball joint remover to disconnect the tie-rod end from the steering arm on the damper. Do not strike the housing or any other part of the ball
joint connection to disconnect it.
7.
Remove the wheel sensor harness bracket and the brake hose bracket from the damper. Do not disconnect the wheel sensor connector or the brake
hose.