Civic HX Coupe L4-1668cc 1.7L SOHC (VTEC-E) MFI (2001)
_mfi/Page-3013002.png)
8. If the old quarter glass will be reinstalled (and either clip is broken off the molding), apply a light coat of primer, then apply butyl tapes (A) and
(B) to the molding (C) as shown:
-
Be careful not to touch the quarter glass where adhesive will be applied.
-
Do not peel the separator off the butyl tapes.
9. If the new quarter glass will be installed, attach the fastener (A) with adhesive tape to the body. Be sure the fastener lines up with the alignment
marks (B).
Fastener adhesive tape:
Thickness 0.8 mm (0.03 in.)
Width 7 mm (0.28 in.)
