honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Airbag Handling and Storage|Page 8107 > < Air Bag(s) Arming and Disarming|Locations|Page 8104
Page 1
background image

Air Bag(s) Arming and Disarming: Service Precautions
Airbag Handling and Storage

Do not try to disassemble the airbag assembly. It has no serviceable parts. Once an airbag has been operated (deployed), it cannot be repaired or reused.

For temporary storage of the airbag assembly during service, please observe the following precautions:

Store the removed airbag assembly with the pad surface up. The driver's (and front passenger's) airbag connector(s) has (have) a built-in short contact.

WARNING: If the airbag is improperly stored face down, accidental deployment could propel the unit with enough force to cause serious
injury

Store the removed airbag assembly on a secure flat surface away from any high heat source (exceeding 212 °F / 100 °C) and free of any oil, grease,
detergent or water.

CAUTION:  Improper handling or storage can internally damage the airbag assembly, making it inoperative. If you suspect the airbag assembly has
been damaged, install a new unit, and refer to the Deployment/Disposal procedures for disposing of the damaged airbag.

Airbag Handling and Storage|Page 8107 > < Air Bag(s) Arming and Disarming|Locations|Page 8104