Civic LX Sedan L4-1590cc 1.6L SOHC MFI (1998)
8. Installation is the reverse of the removal procedure.
NOTE:
-
Before installing the frame, clear the drain tubes and drain valves by using compressed air.
-
Check the frame seal.
-
Clean the surface of the frame
-
When installing the frame, first attach the rear hooks into the body holes.
-
When connecting the drain tube, slide it over the frame nozzle at least 10 mm (0.39 in.).
-
Install the tube clip as shown.
9. Check for water leaks.
NOTE: Do not use high-pressure water.
