Civic LX Sedan L4-1590cc 1.6L SOHC MFI (1998)
9. Make sure that the brake pad retainers and brake pads are in their original positions.
10. Install the caliper onto sleeve A, and pivot it down into position.
NOTE: Install the guide pin boot into the groove in the caliper properly.
11. Connect the brake hose to the caliper with new sealing washers, and tighten the banjo bolt.
12. Tighten the caliper bolt B.
13. Fill the brake reservoir and bleed the brake system.
14. Perform the following checks.
-
Check for leaks at hose and line joints and connections, and retighten if necessary.
-
Check for brake hoses for interference and twisting
