honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Piston, Engine|Disassembly|Page 1809 > < Piston, Engine|Disassembly|Page 1807
Page 1
background image

Piston: Service and Repair
Piston Pins

REMOVAL

1. Assemble the special tool as shown.

2. Assemble and adjust the length of the piston pin driver and shaft to 53 mm (2.1 inch) as shown.

3. Place the piston on the special tool and press the pin out with the special tools and a hydraulic press.

INSPECTION

Piston, Engine|Disassembly|Page 1809 > < Piston, Engine|Disassembly|Page 1807