honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Indicator Input Test|Page 8770 > < Indicator Input Test|Page 8768
Page 1
background image

Shift Indicator: Adjustments

1. Shift to the [P] position, and loosen the nuts.
2. Slide the switch in the direction of [D4] or [D4] position [within 2.0 mm (0.079 in.)] so that there is continuity between the No.1 and No.7

terminals in the range of free play of the shift lever.

3. Recheck for continuity between each of the terminals.

NOTE:
-

If adjustment is not possible, check for damage to the shift lever detent and/or the bracket. If there is no damage, replace the console switch.

-

The engine should start when the shift lever is in position [N] in the range of free play.

Indicator Input Test|Page 8770 > < Indicator Input Test|Page 8768