Civic LX Sedan L4-1590cc 1.6L SOHC MFI (1998)
A/T Gear Position Switch: Service and Repair
REPLACEMENT
1. Remove the front console, then disconnect the 14P connector from the A/T gear position switch.
2. Remove the two mounting nuts.
3. Position the switch slider to "Neutral" as shown above.
4. Move the shift lever to "Neutral", then slip the switch into position.
5. Attach the switch with the two mounting nuts.
6. Test the switch in the P and N position of the shift lever. The engine should start when the shift lever is in position P anywhere in the range of free
play.
7. Connect the 14P connector, clamp the harness, and install the front console.
