Civic LX Sedan L4-1590cc 1.6L SOHC MFI (1998)
59. Adjust the rack guide screw.
NOTE: After adjusting, check that the rack moves smoothly by sliding the rack right and left.
60. Install the new lockwasher in the groove in the steering rack.
61. Screw each rack ends into the rack.
62. Hold the steering rack with a wrench, and tighten the rack ends.
CAUTION: Be careful not to damage the rack surface with the wrench.
63. After tightening the rack ends, stake the four sections of lock washer with a drift and a mallet.
a. Place the wood block on the press table, then set the lock washer section of the rack end on the wood block securely.
b. Be sure the tool is aligned with the flat sections of the steering rack end before pressing.
c. Stake the lock washer in the center of the flat section of the steering rack end.
