Civic LX Sedan L4-1590cc 1.6L SOHC MFI (1998)
13. Install the steering rack end into the rack.
14. Hold the steering rack with a wrench and tighten the rack end with another.
CAUTION: Be careful not to damage the rack surface with the wrench.
15. After tightening the rack ends, stake the four sections of the lock washer with a roll pin drift and a mallet.
a. Place the wood block on the press table, then set the lock washer section of the rack end on the wood block securely. Be sure the tool is
aligned with the flat sections of the steering rack end before pressing.
b. Stake the lock washer in the center of the flat section of the steering rack end.
16. Apply grease to the circumference of the rack end housing.
17. Apply a light coat of silicone grease to the boot grooves on the rack ends.