honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Sensors and Switches - CVT > < Driven Pulley Speed Sensor|Page 5712
Page 1
background image

Transmission Speed Sensor: Service and Repair

1. Remove the 6 mm bolt and the countershaft speed sensor from the right side cover.
2. Remove the 6 mm bolt and the mainshaft speed sensor from the transmission housing.
3. Replace the 0-ring with a new one before installing the countershaft speed sensor or the mainshaft speed sensor.

NOTE:   Install the mainshaft speed sensor washer on the mainshaft speed sensor. The mainshaft speed sensor washer is used on models with the
D16Y7 engine.

Sensors and Switches - CVT > < Driven Pulley Speed Sensor|Page 5712