Civic LX Sedan L4-1590cc 1.6L SOHC MFI (1998)
3. If the quarter glass is to be reinstalled, use a putty knife to scrape off all traces of old adhesive, then clean the quarter glass surface with alcohol
where adhesive is to be applied.
NOTE: Make sure the bonding surface is kept free of water, oil and grease.
CAUTION: Avoid setting the quarter glass on its edges: small chips may later develop into cracks.
NOTE: Clean the shadowed area.
4. Glue the upper and lower rubber dams to the inside face of the quarter glass, as shown, to contain the adhesive during installation.
NOTE: Be careful not to touch the quarter glass where adhesive will be applied.
5. Install the quarter glass trim on the quarter glass, then glue the upper and lower clips as shown.
NOTE: Be careful not to touch the quarter glass where adhesive will be applied.
