Civic LX Sedan L4-1590cc 1.6L SOHC MFI (1998)
2.
While still pressing down on the switch panel, use your free hand to pull the cover away from the switch until the clip below the top tab releases
from the door grip.
3.
Remove the door panel. Refer to section 20 of the 1996-99 Service Manual.
4.
Remove the plastic rain protector, and if so equipped, the power door lock control unit.
5.
Move the window until you can see the glass mounting bolts, then remove the bolts. Carefully remove the glass by pulling it out through the
window slot.
6.
Remove and discard the glass run channel.
7.
Inspect the front channel and the center channel for deformation or damage. Replace the damaged channels (see PARTS INFORMATION).
8.
Install the new glass run channel (see PARTS INFORMATION).
9.
Reinstall the glass, and install the glass mounting bolts finger-tight.
10.
Raise the glass all the way. Loosen the window regulator bolts, and move the glass up and toward the window sash.
