honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Windows - Bind or Come Out of the Run Channels|Page 9524 > < Windows - Bind or Come Out of the Run Channels|Page 9522
Page 4
background image

11.

Torque the bolts to 8 N.m (6 lb-ft) in the sequence shown.

12.

Lower the glass all the way. Loosen the bolt on the front channel, move the channel toward the glass, then retighten the bolt.

13.

Raise and lower the window several times to make sure the window operates smoothly. If needed, readjust the glass and the front channel.

14.

Reinstall all removed parts.

Rear Door Repair Procedure

1.

With a trim removal tool, carefully press down on the front edge of the power window switch panel between the switch and the door grip cover.
This releases the top tab on the cover.

Windows - Bind or Come Out of the Run Channels|Page 9524 > < Windows - Bind or Come Out of the Run Channels|Page 9522