honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Trunk / Liftgate Lock > < Door Lock Knob Switch Test|Page 10132
Page 1
background image

Power Door Lock Switch: Testing and Inspection
Door Lock Switch Test

Door Lock Switch Test

1. Remove the driver's door panel.

2. Remove the two mounting screws and the door lock switch.
3. Check for continuity between the terminals.

-

There should be continuity between the No.1 and No.2 terminals when the door lock switch is in the LOCKED position.

-

There should be continuity between the No.2 and No.3 terminals when the door lock switch is in the UNLOCKED position.

4. If the continuity is not as specified, replace the switch.

Trunk / Liftgate Lock > < Door Lock Knob Switch Test|Page 10132