honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Strut / Shock Tower > < Body - Front Air Spoiler Loose/Coming OFF|Page 10459
Page 1
background image

Spoiler: Service and Repair

Trunk Lid Spoiler Replacement

For Some '03-05 Models

1. On the inside of the trunk lid, disconnect the high mount brake light connector (A), and remove the nuts (2-door) or bolts (4-door).
2. Lift up on the trunk lid spoiler (B), and on the 4-door, release the pins (C) from both grommets (D). Remove the wire harness grommet (E), then

pull out the spoiler subharness (F) through the hole in the trunk lid, and remove the spoiler.

3. Install the spoiler in the reverse order of removal, and note these items:

-

Replace any damaged seals (G).

-

Before installing the seal, clean the spoiler and bracket surfaces with a sponge dampend in alcohol.

-

Make sure the high mount brake light connector is connected properly.

-

4-door: Apply liquid thread lock to the spoiler mounting bolts before reinstallation.

Strut / Shock Tower > < Body - Front Air Spoiler Loose/Coming OFF|Page 10459