Civic LX Sedan L4-1668cc 1.7L SOHC MFI (2001)
2. Apply liquid gasket, PIN 08718-0001 or 08718-0003, on the oil pump and engine block end cover mating areas.
NOTE: Do not install the parts if 5 minutes or more have elapsed since applying liquid gasket. Instead, reapply liquid gasket after removing old
residue.
3. Apply liquid gasket, P/N 08718-0001 or 08718-0003, to the new oil pan gasket (A) at the four corners of the recesses (B), then install the oil pan
(C).
NOTE: Do not install the parts if 5 minutes or more have elapsed since applying liquid gasket. Instead, reapply liquid gasket after removing old
residue.
4. Tighten the bolts and nuts finger tight at six points as shown.
5. Tighten all bolts and nuts, starting from nut (1), clockwise in 3 steps. In the final step, tighten all bolts, in sequence to 12 Nm (1.2 kgf-cm, 8.7 ft.
lbs.).
6. After assembly, wait at least 30 minutes before filling the engine with oil.
