Civic Sedan L4-1.5L SOHC (16 valve) (1995)
/Page-935001.png)
Case: Service and Repair
NOTE: Place the clutch housing on two pieces of wood thick enough to keep the mainshaft from the hitting the workbench.
1. Remove the back-up light switch.
2. Remove the transmission hanger B.
3. Loosen the transmission housing attaching bolts in a crisscross pattern in several steps, then remove them.
4. Remove the 32 mm sealing bolt.
5. Expand the snap ring on the countershaft ball bearing and remove it from the groove using a pair of snap ring plier.
6. Separate the transmission housing from the clutch housing and wipe it clean of the sealant.
